Check Dimension of Duplex 2205 Stainless Steel Flanges, Manufacturer of UNS S31803 / S32205 Weld Neck Flange
Duplex 2205 Flanges are made up of a dual nature steel that has austenitic and ferritic microstructures in its metallurgy. The material is corrosion resistant to chloride stress. It is used at corrosive environments. Roopam Steel produces flanges in 2205 material and supply them in large quantities. The Class 150 Duplex S31803 Flanges are one of the low pressure variations of the flanges. There are classes ranging from 150 to 2500 and PN6 through PN64 in 2205 flanges. We are leading Duplex 2205 Flanges Supplier in India. The classes correspond to the pressure capacities of the flanges. The different varieties of the flanges include the Duplex UNS S32205 Orifice Flange which is the most commonly used duplex orifice flange. The applications of the flanges vary based on the requirement. The ANSI B16.5 UNS S31803 Duplex Steel Blind Flange is used to close a pipe and it ranges from ½ inches to 48 inches in nominal bore size as determined by the standard.
Duplex 2205 Flanges
Duplex Stainless Steel Flanges
UNS S31803 / S32205 Weld Neck Flange
Superior pitting and crevice corrosion resistance Class 150 Duplex S31803 Flanges, Refer Pressure Rating of Duplex SAF 2205 Flanges
The ASTM A182 Duplex S31803 Slip On Flanges are used for high pressure vessels and high pressure applications. The operating temperature ranges up to 150 degrees Celsius in chloride rich environments. There are welded, bolted and threaded flanges in this material grade. The Duplex Steel Werkstoff No 1.4462 Threaded Flanges are used where welding is not preferred. There are different types such as the Duplex SAF 2205 Socket Weld Flanges which use a socked welded onto them for strength. The material is strong with 621MPa minimum tensile strength and 448MPa minimum yield strength. To increase the surface for connection, the Duplex Steel S31803/S32205 RTJ Flange is used. It is applied in two halves as a pair. We also supply other types such as the 2205 Duplex Weld Neck Flange. Please contact us for your 2205 flange needs.
Table of Content
- Spec Chart of Duplex 2205 Flanges
- Size of Duplex Steel 2205 Pipe Flange
- S32205 Duplex Steel Blind Flange Stock List
- Most frequent types of Duplex Stainless Steel 2205 Pipe Flange
- ASTM A182 Duplex Steel Flange Price List
- Chemical Structure of Duplex S32205 Flanges
- Mechanical Properties Chart of Duplex SS 2205 Flange
- Equivalent material of Duplex Steel 1.4462 Flanges
- Physical Properties of S32205 Duplex Steel Flange
- Dimensions of Duplex F51 Flanges
- Weight Chart of Duplex 2205 Flanges
- Duplex Stainless Steel Flange Pressure Rating
- Dimensions Tolerance of Duplex Ss Flanges
- Heat Resistance of 2205 Duplex Flanges
- Possible Alternative Grades in Place of 2205 SS Duplex Flange
- We Supply Regular Consignments To Below Places
Spec Chart of Duplex 2205 Flanges
| Standards | GOST Flange, JISB2220, BS1560-3.1, API7S-15, API7S-43, API605, EN1092, BS, BS4504, BS 10, EN-1092, DIN, ANSI, ASME, DIN, MSS S44, ISO70051, ANSI/ASME B16.5, ASME/ANSI B16.5/16.36/16.47A/16.47B, B16.47 Series A & B, B16.48, EN |
|---|---|
| Pressure Rating ANSI | Class 1500, Class 150, Class 900, Class 2500, Class 300, Class 600, |
| Pressure Calculation in DIN | 10Bar, 16Bar, 25Bar, 40Bar, 6Bar, / PN16, PN64, PN40, PN25, PN10, PN6 |
| JIS | 16 K, 20 K, 5K, 10 K, 40 K, 63 K, 30 K, |
| UNI | 10Bar 16Bar 6Bar 25Bar 40Bar |
| EN | 6Bar 25Bar 40Bar 10Bar 16Bar |
| Most common Types | Threaded / Screwed / Forged / Plate |
| Production technique |
|
| Shapes and Types we produce | Large Male-Female (LMF), Ring Type Joint (RTJ), Flat Face (FF), Small Tongue, Small Male-Female (SMF),Raised Face (RF), Large Tongue & Groove, Groove, Lap-Joint Face (LJF) |
| Test | Direct-reading Spectrograph, Magnetic particle detector, Hydrostatic testing machine, X-ray detector, UI trasonic flaw detector |
| Equipment | Pushing Machine, Press machine, Bending machine, Sand-blasting machine, electric bevelling machine etc |
Size of Duplex Steel 2205 Pipe Flange
- ASTM A182 Duplex Steel Flange : 1/2" (15 NB) to 48" (1200NB)
- Duplex Steel 1.4462 Blind Flange : 1/2″ NB – 24″ NB
- Duplex Stainless Steel 2205 Slip on Flange : 1/2″ NB – 12″ NB
Leading 2205 Duplex Blind Flange stockist, View Price List of ASTM A182 Duplex S31803 Slip On Flanges
S32205 Duplex Steel Blind Flange Stock List
| Duplex 2205 Flange | Duplex Stainless Steel 2205 Blind Flange |
| Duplex Steel 2205 Slip on Flange | S32205 Duplex Steel Threaded Flange |
| ASTM A240 Duplex Steel Reducing Flange | Duplex Steel 1.4462 Socket Weld Flange |
| Duplex S32205 Weld Neck Flanges | Duplex SS 2205 Lap Joint Flanges |
| Duplex Steel 1.4462 Long Weld Neck Flanges | Duplex Steel 2205 Spectacle Blind Flanges |
| ASTM A240 Duplex Steel Spades & Ring Spacers | Duplex Stainless Steel 2205 Nipoflange |
| S32205 Duplex Steel 5D Weldoflange | Duplex S32205 Flange Outlet |
| Duplex 2205 Forged Flanges | Duplex Steel 1.4462 Plate Flange |
| S32205 Duplex Steel Ring Type Joint Flanges | ASTM A240 Duplex Steel Raised Face Flanges |
| Duplex SS 2205 Tongue and Groove Flanges | Duplex Steel 2205 Male and Female Flange |
| Duplex S32205 Reducing Flanges | Duplex Stainless Steel 2205 ASME B16.5 Flanges |
| Duplex 2205 Flanges | Duplex Steel 1.4462 BS 10 Flanges |
| ASTM A240 Duplex Steel BS 4504 Flanges | S32205 Duplex Steel EN 1092-1 Flanges |
| Duplex S32205 SORF Flange | Duplex Steel 2205 BLRF Flange |
| Duplex Stainless Steel 2205 WNRF Flange | Duplex 2205 Series a Lap Joint Ring Flange |
| Duplex Steel 1.4462 PN16 blind flange | ASTM A240 Duplex Steel Forged Socket Weld Pipe Flange |
| Duplex Steel 2205 Class 300 slip on flange | Duplex S32205 Slip On Weld Flange |
| S32205 Duplex Steel Forged steel slip on flanges | Duplex Stainless Steel 2205 Race face slip on flange |
| Duplex 2205 SWRF Flange | Duplex SS 2205 Forged blind flange |
| Duplex Steel 2205 groove weld neck flange | Duplex Steel 1.4462 Socket Weld Hub Flange |
| ASTM A240 Duplex Steel threaded lap joint flange | Duplex Stainless Steel 2205 Slip On Integral flange |
| Duplex SS 2205 Forged integral puddle flange | S32205 Duplex Steel table e long weld neck |
| Duplex Steel 2205 Class 150 LBS Flange | Duplex SS 2205 PN10 Forged Flanges |
Certified & Tested Duplex Steel Werkstoff No 1.4462 Threaded Flanges, Refer Duplex Steel S31803/S32205 RTJ Flange Pressure Rating
Most frequent types of Duplex Stainless Steel 2205 Pipe Flange
ASTM A182 Duplex Steel Flange Price List
| Price list of Duplex 2205 Flange | S32205 Duplex Steel Flange Price in INR | S32205 Duplex Steel Flange Price in USD | S32205 Duplex Steel Flange Price in UAE Dirham |
|---|---|---|---|
| SO FLANGE 3MM DUPLEX 2205 | 12,275 | $161.88 | UAE Dirham 595.09 |
Largest 2205 Duplex Weld Neck/ Socket Weld Flange Stockholder, Order custom sizes online ASTM A182 Duplex S31803 Pipe Flange for faster delivery
Chemical Structure of Duplex S32205 Flanges
| S31803 / S32205 | C | N | P | Si | Mn | Mo | Fe | Cr | S | Ni |
| 1.0 | 0.03 | 0.02 | 2.0 | 3.0 - 3.5 | 22.0 - 23.0 | 0.03 | 4.5 - 6.5 | 0.14 - 0.2 | Bal |
Mechanical Properties Chart of Duplex SS 2205 Flange
| S31803 / S32205 | Density | Melting Point | Yield Strength (0.2%Offset) | Tensile Strength | Elongation |
| 7.8 g/cm3 | 1350 °C (2460 °F) | Psi - 80000 , MPa - 550 | Psi - 116000 , MPa - 800 | 15 % |
Equivalent material of Duplex Steel 1.4462 Flanges
| STANDARD | UNS | WERKSTOFF NR. |
| Duplex S31803 | S31803 | 1.4462 |
| Duplex S32205 | S32205 | 1.4462 |
Physical Properties of S32205 Duplex Steel Flange
|
Grade |
Density |
Elastic (GPa) |
Mean Co-eff of Thermal |
Thermal |
Specific ( J/kg.K) |
Electrical |
|||
|
0-100°C |
0-315°C |
0-538°C |
at 100°C |
at 500°C |
|||||
|
2205 |
782 |
190 |
13.7 |
14.2 |
- |
19 |
- |
418 |
850 |
Dimensions of Duplex F51 Flanges
| Nominal Size |
Outside Diameter (OD) |
Min. Thickness (T) |
RF Dia. (R) |
No. of Bolt Holes | Diameter of Holes |
Bolt Circle (BC) |
SO Bore ID (SB) |
WN Bore ID (WB) |
Dia. Hub Base (HB) |
Dia. of Hub Top (HT) |
SO LTH (SL) |
WN LTH (WL) |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 1⁄2 | 3.50 | 0.38 | 1.38 | 4 | 0.62 | 2.38 | 0.88 | 0.62 | 1.19 | 0.84 | 0.56 | 1.81 |
| 3⁄4 | 3.88 | 0.44 | 1.69 | 4 | 0.62 | 2.75 | 1.09 | 0.82 | 1.50 | 1.05 | 0.56 | 2.00 |
| 1 | 4.25 | 0.50 | 2.00 | 4 | 0.62 | 3.12 | 1.36 | 1.05 | 1.94 | 1.32 | 0.62 | 2.12 |
| 11⁄4 | 4.62 | 0.56 | 2.50 | 4 | 0.62 | 3.50 | 1.70 | 1.38 | 2.31 | 1.66 | 0.75 | 2.19 |
| 11⁄2 | 5.00 | 0.62 | 2.88 | 4 | 0.62 | 3.88 | 1.95 | 1.61 | 2.56 | 1.90 | 0.81 | 2.38 |
| 2 | 6.00 | 0.69 | 3.62 | 4 | 0.75 | 4.75 | 2.44 | 2.07 | 3.06 | 2.38 | 0.94 | 2.44 |
| 21⁄2 | 7.00 | 0.81 | 4.12 | 4 | 0.75 | 5.50 | 2.94 | 2.47 | 3.56 | 2.88 | 1.06 | 2.69 |
| 3 | 7.50 | 0.88 | 5.00 | 4 | 0.75 | 6.00 | 3.57 | 3.07 | 4.25 | 3.50 | 1.12 | 2.69 |
| 31⁄2 | 8.50 | 0.88 | 5.50 | 8 | 0.75 | 7.00 | 4.07 | 3.55 | 4.81 | 4.00 | 1.19 | 2.75 |
| 4 | 9.00 | 0.88 | 6.19 | 8 | 0.75 | 7.50 | 4.57 | 4.03 | 5.31 | 4.50 | 1.25 | 2.94 |
| 5 | 10.00 | 0.88 | 7.31 | 8 | 0.88 | 8.50 | 5.66 | 5.05 | 6.44 | 5.56 | 1.38 | 3.44 |
| 6 | 11.00 | 0.94 | 8.50 | 8 | 0.88 | 9.50 | 6.72 | 6.07 | 7.56 | 6.63 | 1.50 | 3.44 |
| 8 | 13.50 | 1.06 | 10.62 | 8 | 0.88 | 11.75 | 8.72 | 7.98 | 9.69 | 8.63 | 1.69 | 3.94 |
| 10 | 16.00 | 1.12 | 12.75 | 12 | 1.00 | 14.25 | 10.88 | 10.02 | 12.00 | 10.75 | 1.88 | 3.94 |
| 12 | 19.00 | 1.19 | 15.00 | 12 | 1.00 | 17.00 | 12.88 | 12.00 | 14.38 | 12.75 | 2.12 | 4.44 |
| 14 | 21.00 | 1.31 | 16.25 | 12 | 1.12 | 18.75 | 14.14 | 13.25 | 15.75 | 14.00 | 2.19 | 4.94 |
| 16 | 23.50 | 1.38 | 18.50 | 16 | 1.12 | 21.25 | 16.16 | 15.25 | 18.00 | 16.00 | 2.44 | 4.94 |
| 18 | 25.00 | 1.50 | 21.00 | 16 | 1.25 | 22.75 | 18.18 | 17.25 | 19.88 | 18.00 | 2.62 | 5.44 |
| 20 | 27.50 | 1.62 | 23.00 | 20 | 1.25 | 25.00 | 20.20 | 19.25 | 22.00 | 20.00 | 2.81 | 5.62 |
| 22 | 29.50 | 1.75 | 25.25 | 20 | 1.38 | 27.25 | 22.22 | 21.25 | 24.25 | 22.00 | 3.07 | 5.82 |
| 24 | 32.00 | 1.81 | 27.25 | 20 | 1.38 | 29.50 | 24.25 | 23.25 | 26.12 | 24.00 | 3.19 | 5.94 |
Weight Chart of Duplex 2205 Flanges
| Standard | Class | Diameter | Bolt Circle Diameter | Number of Bolts | Bolt Size | Diameter of Bolt Hole |
|---|---|---|---|---|---|---|
| AS4087 | PN14 | 95 | 67 | 4 | M12 | 14 |
| AS 2129 | Table C | 95 | 67 | 4 | 13 | 14 |
| Table D | 95 | 67 | 4 | 13 | 14 | |
| Table E | 95 | 67 | 4 | 13 | 14 | |
| Table F | 95 | 67 | 4 | 13 | 14 | |
| Table H | 114 | 83 | 4 | 16 | 17 | |
| Table J | 114 | 83 | 4 | 16 | 17 | |
| ANSI B16.5 | ANSI 150 | 89 | 60 | 4 | 13 | 16 |
| ANSI 300 | 95 | 67 | 4 | 13 | 16 | |
| ANSI 600 | 95 | 67 | 4 | 13 | 16 | |
| ANSI 900 | 121 | 83 | 4 | 19 | 22 | |
| ANSI 1500 | 121 | 83 | 4 | 19 | 22 | |
| ISO 7005 (DIN) | PN6 | 80 | 55 | 4 | M10 | 11 |
| PN10 | 95 | 65 | 4 | M12 | 14 | |
| PN16 | 95 | 65 | 4 | M12 | 14 | |
| PN20 | 90 | 60.5 | 4 | M14 | 16 | |
| PN25 | 95 | 65 | 4 | M12 | 14 | |
| PN40 | 95 | 65 | 4 | M12 | 14 |
Duplex Stainless Steel Flange Pressure Rating
| Temp. ℃ | Pressure-temperature rating for ASME B16.47 by class, bar | |||||
| 75 | 150 | 300 | 400 | 600 | 900 | |
| -29 to 38 | 10.0 | 20.0 | 51.7 | 68.9 | 103.4 | 155.1 |
| 50 | 9.8 | 19.5 | 51.7 | 68.9 | 103.4 | 155.1 |
| 100 | 8.8 | 17.7 | 50.7 | 67.5 | 101.3 | 152.0 |
| 150 | 7.9 | 15.8 | 45.9 | 61.2 | 91.9 | 137.8 |
| 200 | 6.9 | 13.8 | 42.7 | 56.9 | 85.3 | 128.0 |
| 250 | 6.0 | 12.1 | 40.5 | 53.9 | 80.9 | 121.4 |
| 300 | 5.1 | 10.2 | 38.9 | 51.8 | 77.7 | 116.6 |
| Temp, ℃ | Pressure-temperature rating for ASME B16.5 by class, bar | ||||||
| 150 | 300 | 400 | 600 | 900 | 1500 | 2500 | |
| -29 to 38 | 20.0 | 51.7 | 68.9 | 103.4 | 155.1 | 258.6 | 430.9 |
| 50 | 19.5 | 51.7 | 68.9 | 103.4 | 155.1 | 258.6 | 430.9 |
| 100 | 17.7 | 50.7 | 67.5 | 101.3 | 152.0 | 253.3 | 422.2 |
| 150 | 15.8 | 45.9 | 61.2 | 91.9 | 137.8 | 229.6 | 382.7 |
| 200 | 13.8 | 42.7 | 56.9 | 85.3 | 128.0 | 213.3 | 355.4 |
| 250 | 12.1 | 40.5 | 53.9 | 80.9 | 121.4 | 202.3 | 337.2 |
| 300 | 10.2 | 38.9 | 51.8 | 77.7 | 116.6 | 194.3 | 323.8 |
Dimensions Tolerance of Duplex Ss Flanges
| Outside Diameter ≤ 24 = 1.6 mm | > 24 = ± 3.2 mm |
Inside Diameter not applicable |
| Diameter of Contact Face 1.6 mm Raised Face = ± 0.8 mm 6.35 mm Raised Face, Tongue & Groove / Male-Female = ± 0.4 mm |
Outside Diameter of Hub ≤ 12 = + 2.4 mm / – 1.6 mm | ≥ 14 = ± 3.2 mm |
| Diameter of Counterbore not applicable |
Drilling Bolt Circle = 1.6 mm | Bolt Hole Spacing = ± 0.8 mm Eccentricity of Bolt Circle with Respect to Facing ≤ 2½ = 0.8 mm max. | ≥ 3 = 1.6 mm max. |
| Thickness ≤ 18 = + 3.2 mm / – 0 | ≥ 20 = + 4.8 mm / – 0 |
Length thru Hub ≤ 18 = + 3.2 mm / – 0.8 mm | ≥ 20 = + 4.8 mm / – 1.6 mm |
Heat Resistance of 2205 Duplex Flanges
| Heat Resistance | 300°C |
Possible Alternative Grades in Place of 2205 SS Duplex Flange
|
904L |
Better formability is needed, with similar corrosion resistance and lower strength. |
|
UR52N+ |
High resistance to corrosion is required, e.g. resistance to higher temperature seawater. |
|
6%Mo |
Higher corrosion resistance is required, but with lower strength and better formability. |
|
316L |
The high corrosion resistance and strength of 2205 are not needed. 316L is lower cost. |
We Supply Regular Consignments To Below Places
| 150lb Dn150 duplex steel flat welding slip on flange | Philippines, Belgium, Canada, Dammam -KSA |
| DN150 Duplex Steel 2205 Pipe Puddle Flange | Europe, Thailand, Malaysia, Qatar |
| 8 inch 304 Duplex Steel Blind Flanges | Thailand, Malaysia, Japan, Czechia |
| ASTM A815 F51 3/4" Class 150 RF Duplex Steel Flange | Bangladesh, Finland, Colombia, Malaysia |
| DSS ASTM A182 F51 Threaded Flanges | Kuwait, Brazil, Taiwan, South Africa |
| ANSI B16.5 Wn Rtj Flange 2205 Duplex Class 150/600/1500/900 | Singapore, Singapore, South Korea, Bahrain |
| UNS S31803 Duplex Stainless Steel Blind Flange | UK, Nigeria, Indonesia, Philippines |
| Standard duplex 2205 flanges for construction | Hong Kong, UAE, France, Oman |
| EN1092-1 Duplex F53 Flange | Iran, Singapore, Germany, Chile |
| 2" 600LB SCH40s Forged Duplex Steel Flanges | Romania, Ellington -United States, USA, Netherlands |
| Forged UNS S31803 Lap Joint Flange ANSI B16.5 | Malaysia, Singapore, Saudi Arabia (KSA), Egypt |
| 4" Class 300 Welde Neck flange SS F51 DN80 Forged flange | Los Alamos -Mexico, Malaysia, South Africa, United Kingdom -UK |
| Forged DN100 Class 150 RF Duplex Steel Weld Neck Flange | NY 12203 (USA), China, Australia, Sweden |
| 16Bar Duplex F53 SS Plate | Malaysia, Philippines, Malaysia, UK |
| Duplex Stainless Steel Weld Neck Flange | Poland, Malaysia, Italy, Philippines |
| ASME B16.5 RF Duplex Steel 2205 Class 150 SCH STD Weld Neck Flange | Canada, Dubai, Turkey, Europe |
| a182 f51 duplex stainless steel flange 6 inch | Norway, Malaysia, Europe, United Arab Emirates (UAE) |
| ASTM A182 F51 Lap Joint Flange | Russia, UAE, Malaysia, Malaysia |
| Duplex Stainless Steel Socket Welding Flange | Mexico, UK, Spain, Singapore |
