Check Price list of Duplex Steel Sheet, Supplier of ASTM A240 type 2205 Coil
Duplex 2205 Sheet / Plate can be hot rolled or cold rolled. The cold rolled plates range from 0.5mm to 6.4mm where the hot rolled plates range from 3.mm to 10mm. But the sheets could be made from 0.1mm to 100mm in thickness with a width of 10mm to 2500mm. Roopam Steel is a manufacturer and supplier of these plates and sheets in custom sizes. The Duplex 2205 Plate is used in strong applications such as paneling, platforms, containers and in processing plants for corrosion resistance. Leading Duplex Steel Plate Supplier in UAE, Saudi Arabia, Indonesia. Check Price list of Duplex Steel Sheet. It has chromium, nickel and molybdenum in its composition. The minimum tensile strength of the material is 621MPa and the minimum yield strength of the material is 448MPa.
Duplex Steel 2205 Sheet
Duplex Steel Sheet
ASTM A240 type 2205 Coil
Get a Best Quote for Duplex 2205 Sheet. View SAF 2205 Plate Thickness.
The 2205 Duplex stainless steel sheet could be made in different finishes such as perforated and polished with different manufacturing procedures such as hot rolling or cold rolling. We are Duplex 2205 Plate Supplier in more than 40 countries. The UNS S31803 Plate has a high Brinell hardness of 293 which means it can operate under high stress. Due to these high mechanical properties the application of the S32205 Sheet could be seen in processing equipment, oil and gas industries, high chloride rich and marine environments. The ASTM A240 type 2205 Coil is used in paper mills, liquor productions and in food processing. The ASME SA240 Grade 2205 Strip is used to produce pipes and tubes. The strips are also used in applications as linings against corrosion. If you are looking for Duplex Plate Supplier contact us at marketing@roopamsteel.com.
Duplex 2205 Sheet
Table of Content
- Duplex 2205 Sheet Spec Chart
- Various Sizes of Duplex Stainless Steel 2205 Foil
- Duplex Steel 2205 Coil Stock List
- Frequently Used S32205 Duplex Steel Plate Types
- Cost of ASTM A240 Duplex Steel Plate
- Chemical Equation of Duplex Steel 1.4462 Sheet
- Mechanical Strength Table of Duplex S32205 Sheet
- Equivalent of Duplex SS 2205 Sheet
- Sizes of ASME SA 240 UNS S32205 Sheet
- Dimensions of Duplex 2205 Plate
- Weight Chart of Alloy 2205 Plate
- Roopam Steel is prominent Supplier in Europe and West Africa
Duplex 2205 Sheet Spec Chart
| ASTM Specification | ASTM A240 / ASME SA240 |
|---|---|
| Standard | MSRR, AMS, BS, ASTM A240 / ASME SA240 |
| Length & Sizes | 1000 mm x 2000 mm, 1000 mm x 2000 mm, 1220 mm x 2440 mm, 1250mm x 2500mm, 1500mm x 3000mm to 6000mm, 2000mm x 4000mm to 6000mm, 1500 mm x 3000 mm, 2000 mm x 2000 mm, 2000 mm x 4000 mm, 2m, 2.44m, 3m, 36" X 120" or 48" X 144", 4' x 8', Cut to size available |
| Thickness | 0.1mm to 100 mm Thk |
| Width | 10-2500mm |
| Hardness | Soft, Hard, Half Hard, Quarter Hard, Spring Hard etc. |
| Temper | Annealed |
| Condition | Polished on both sides |
| Finish | Hot rolled plate (HR), Cold rolled sheet (CR), 2B, 2D, BA NO(8), SATIN (Met with Plastic Coated) |
| Stock in form of | Plate, Sheet, Coils, Foils, Rolls, Plain Sheet, Shim Sheet, Strip, Flats, Clad Plate, Rolling Sheet, Flat Sheet, Rolling Plate, Flat Shim, Blank (Circle), hot rolled, cold rolled, annealed, soft annealed, descaled, sheared, tread plate, Checker Plate |
| Value Added Service | Cladding, Heat Treatment, Annealed, Pickling, Polish, Rolling, Cutting, Bending, Forging, Minor Fabrication Etc. |
| Dealers & Distributor of | SAIL, ESSAR, JINDAL, TATA, BHUSHAN, INDIAN, POSCO, JISCO, TISCO, LISCO, BAOSTEEL IMPORTED material |
| Test Report |
|
| Profiling |
To provide a full profiling service we use numerous profiling methods including:
|
| Specialized in |
|
| We offer a comprehensive services designed to add value to your project: plasma cutting, waterjet cutting, laser cutting, bending and mechanical processing, edge preparation, welding, sawing and shearing. | |
Various Sizes of Duplex Stainless Steel 2205 Foil
- Cold rolled ASTM A240 Duplex Steel Plate : 0.5-6.4 mm
- Hot rolled Duplex SS 2205 Plate : 3.0–10.0 mm
- S32205 Duplex Steel Sheet : 0.01~200mm
Most recognized manufacturer of ASME SA240 Grade 2205 Strip, Global sales network of SAF 2205 Plate
Duplex Steel 2205 Coil Stock List
| Duplex 2205 Chequered Plate | Duplex Steel 2205 Quarto Plate |
| Duplex S32205 Sheet | S32205 Duplex Steel Tisco Plate |
| Duplex SS 2205 Chequer Plate | ASTM A240 Duplex Steel Tread Plate |
| Duplex Steel 1.4462 Checker Plate | Duplex Stainless Steel 2205 Strip |
| ASTM A240 Duplex Steel Plate Brushed Finish | UNS S32205 Hot Rolled Sheet |
| Duplex 2205 10mm Shim | Duplex Steel 2205 Cold Rolled Sheet |
| ASTM A240 Duplex Steel 1/4 Inch Coil | Duplex Steel Sheet |
| Duplex Stainless Steel 2205 Plate | S32205 Duplex Steel Rolling Plate |
| Duplex Steel 2205 Hot Rolled Plate | ASTM A240 Duplex Steel Foil |
| S32205 Duplex Steel Cold Rolled Plate | Duplex Steel 1.4462 Bbq Plate |
| ASTM A240 Duplex Steel Plate 2b Finish | Duplex S32205 Coil |
| Duplex Steel 1.4462 Plate Mill Finish | Duplex SS 2205 Strip Tape |
| Duplex Stainless Steel 2205 Custom Cut Plate | Duplex SS 2205 Sheet |
| S32205 Duplex Steel Shim | Duplex 2205 Laser Cut Plate |
| ASTM A240 Duplex Steel Embossed Sheet | Duplex Stainless Steel 2205 Perforated Sheet |
View Dimensions of ASTM A240 type 2205 Coil, UNS S31803 Plate Supplier
Frequently Used S32205 Duplex Steel Plate Types
Cost of ASTM A240 Duplex Steel Plate
| Price list of Duplex 2205 Plate / Sheet | Duplex Steel 2205 Plate / Sheet Price in INR | Duplex Steel 2205 Plate / Sheet Price in USD | Duplex Steel 2205 Plate / Sheet Price in UAE Dirham |
|---|---|---|---|
| C.R. SECOND CHOICE S.S. SHEET/PLATE DUPLEX 2205 | 110 | $1.45 | UAE Dirham 5.32 |
| STAINLESS STEEL HOT ROLLED SHEETS GRADE DUPLEX 2205 (SIZE:10.00 MM X 1500 MM X 6000 MM) | 174 | $2.32 | UAE Dirham 8.52 |
| H.R. SECOND CHOICE S.S. SHEET/PLATE DUPLEX 2205 (SIZE: THK:06 TO 08 X WIDTH: 1500 TO 2000 X LENGTH: 2555 TO 4000 MM) | 110 | $1.45 | UAE Dirham 5.32 |
| DUPLEX STAINLESS STEEL HOT ROLLED SHEET GRADE 2205 WIDTH 1500 MM THK 10 MM | 304 | $4.05 | UAE Dirham 14.88 |
| STAINLESS STEEL HOT ROLLED SHEETS GRADE DUPLEX 2205 SURPLUS STOCK WIDTH ABOVE 1500 MM THK ABOVE 9 MM | 172 | $2.29 | UAE Dirham 8.42 |
Purchase UNS S31803 Foil at Factory Price, Call Us to Get Stock List of ASTM A240 type 2205 Sheet
Chemical Equation of Duplex Steel 1.4462 Sheet
| S31803 / S32205 | C | N | P | Si | Mn | Mo | Fe | Cr | S | Ni |
| 1.0 | 0.03 | 0.02 | 2.0 | 3.0 - 3.5 | 22.0 - 23.0 | 0.03 | 4.5 - 6.5 | 0.14 - 0.2 | Bal |
Mechanical Strength Table of Duplex S32205 Sheet
| S31803 / S32205 | Density | Melting Point | Yield Strength (0.2%Offset) | Tensile Strength | Elongation |
| 7.8 g/cm3 | 1350 °C (2460 °F) | Psi - 80000 , MPa - 550 | Psi - 116000 , MPa - 800 | 15 % |
Equivalent of Duplex SS 2205 Sheet
| STANDARD | UNS | WERKSTOFF NR. |
| Duplex S31803 | S31803 | 1.4462 |
| Duplex S32205 | S32205 | 1.4462 |
Sizes of ASME SA 240 UNS S32205 Sheet
| Thickness (mm) |
Length x width (mm) |
Length x width (mm) | Length x width (mm) |
Length x width (mm) |
Length x width (mm) |
| 5 | 4000 x 2000 | 6000 x 2000 | 6000 x 2500 | 6000 x 3000 | 8000 x 2000 |
| 6 | 4000 x 2000 | 6000 x 2000 | 6000 x 2500 | 6000 x 3000 | 8000 x 2000 |
| 8 | 4000 x 2000 | 6000 x 2000 | 6000 x 2500 | 6000 x 3000 | 8000 x 2000 |
| 10 | 4000 x 2000 | 6000 x 2000 | 6000 x 2500 | 6000 x 3000 | 8000 x 2000 |
| 12 | 4000 x 2000 | 6000 x 2000 | 6000 x 2500 | 6000 x 3000 | 8000 x 2000 |
| 15 | 4000 x 2000 | 6000 x 2000 | 6000 x 2500 | 6000 x 3000 | 8000 x 2000 |
| 16 | 4000 x 2000 | 6000 x 2000 | 6000 x 2500 | 6000 x 3000 | 8000 x 2000 |
| 20 | 4000 x 2000 | 6000 x 2000 | 6000 x 2500 | 6000 x 3000 | 8000 x 2000 |
| 25 | 4000 x 2000 | 6000 x 2000 | 6000 x 2500 | 6000 x 3000 | 8000 x 2000 |
| 30 | 4000 x 2000 | 6000 x 2000 | 6000 x 2500 | 6000 x 3000 | 8000 x 2000 |
| 35 | 4000 x 2000 | 6000 x 2000 | 6000 x 2500 | 6000 x 3000 | 8000 x 2000 |
| 40 | 4000 x 2000 | 6000 x 2000 | 6000 x 2500 | 6000 x 3000 | 8000 x 2000 |
| 45 | 4000 x 2000 | 6000 x 2000 | 6000 x 2500 | 6000 x 3000 | 8000 x 2000 |
| 50 | 4000 x 2000 | 6000 x 2000 | 6000 x 2500 | 6000 x 3000 | 8000 x 2000 |
| 60 | 4000 x 2000 | ||||
| 70 | 4000 x 2000 | ||||
| 80 | 4000 x 2000 | ||||
| 90 | 4000 x 2000 | ||||
| 100 | 4000 x 2000 |
Dimensions of Duplex 2205 Plate
Duplex 2205 Plate Metric Dimensions
| Surface finish | Thickness (mm) | Width (mm) |
|---|---|---|
| 2B – Cold rolled, heat treated, pickled, skin passed | 0.25–8.0 | max. 2032 |
| 2D – Cold rolled, heat treated, pickled | 0.4–6.35 | max. 1524 |
| 2E – Cold rolled, heat treated, mechanically descaled | 0.4–8.0 | max. 2032 |
| 2R – Cold rolled, bright annealed | 0.25–3.5 | max. 1524 |
| 2H – Work hardened | 0.4–6.35 | max. 1524 |
| Polished, brushed | 0.5–4.0 | max. 1524 |
Imperial Dimensions of ASME SA 240 UNS S32205 Sheet
| Surface finish | Gauge (in) | Width (in) |
|---|---|---|
| 2B – Cold rolled, heat treated, pickled, skin passed | 10–24 | max. 72* |
| 2D – Cold rolled, heat treated, pickled | 12–24 | max. 60 |
| BA Mexinox only | 18–28 | max. 48 |
| Polished (not brushed) | 11–24 | max. 60 |
| Temper rolled Mexinox only | 13–29 | max. 48 |
Weight Chart of Alloy 2205 Plate
| Thickness | Plate Weight per Unit Area | Density |
|---|---|---|
| 3/16 inches | 0.06000 lbs/in²42.184176 kg/m² | 0.315 lbs/in³8.72 g/cm³ |
| 1/4 inches | 0.08 lbs/in²56.245568 kg/m² | 0.315 lbs/in³8.72 g/cm³ |
| 3/8 inches | 0.121 lbs/in²85.0714216 kg/m² | 0.315 lbs/in³8.72 g/cm³ |
| 1/2 inches | 0.161 lbs/in²113.1942056 kg/m² | 0.315 lbs/in³8.72 g/cm³ |
| 5/8 inches | 0.196 lbs/in²137.8016416 kg/m² | 0.315 lbs/in³8.72 g/cm³ |
| 3/4 inches | 0.235 lbs/in²165.221356 kg/m² | 0.315 lbs/in³8.72 g/cm³ |
| 7/8 inches | 0.274 lbs/in²192.6410704 kg/m² | 0.315 lbs/in³8.72 g/cm³ |
| 1 inches | 0.313 lbs/in²220.0607848 kg/m² | 0.315 lbs/in³8.72 g/cm³ |
| 1 1/4 inches | 0.391 lbs/in²274.9002136 kg/m² | 0.315 lbs/in³8.72 g/cm³ |
| 1 1/2 inches | 0.47 lbs/in²330.442712 kg/m² | 0.315 lbs/in³8.72 g/cm³ |
| 1 3/4 inches | 0.549 lbs/in²385.9852104 kg/m² | 0.315 lbs/in³8.72 g/cm³ |
| 2 inches | 0.627 lbs/in²440.8246392 kg/m² | 0.315 lbs/in³8.72 g/cm³ |
| 2 1/4 inches | 0.705 lbs/in²495.664068 kg/m² | 0.315 lbs/in³8.72 g/cm³ |
| 2 1/2 inches | 0.784 lbs/in²551.2065664 kg/m² | 0.315 lbs/in³8.72 g/cm³ |
| 2 3/4 inches | 0.862 lbs/in²606.0459952 kg/m² | 0.315 lbs/in³8.72 g/cm³ |
| 3 inches | 0.941 lbs/in²661.5884936 kg/m² | 0.315 lbs/in³8.72 g/cm³ |
Roopam Steel is prominent Supplier in Europe and West Africa
| 1.5mm Duplex 2205 Stainless Steel Plate | United Kingdom -UK, China, Chile, South Africa |
| Duplex Steel 2205 BA 2B NO.4 hairline satin finish sheet | UK, Philippines, United Arab Emirates (UAE), Bahrain |
| duplex inox 2205 mirror 0.3-3mm stainless steel plate | Philippines, Malaysia, Netherlands, Philippines |
| SA-240 Duplex 2205 Trim Plate | Europe, Sweden, Egypt, Oman |
| 1.4462 duplex stainless steel plate 2205 | Spain, Malaysia, Australia, Germany |
| SA-240 Duplex 2205 Perforated Plates | Europe, Singapore, Malaysia, USA |
| 2205 Duplex Stainless Steel Strip | Canada, Japan, Italy, Saudi Arabia (KSA) |
| duplex 2205 cold rolled stainless steel sheet | Malaysia, Colombia, Turkey, South Africa |
| hot rolled 2mm 2205 duplex SS sheet | Mexico, Taiwan, Malaysia, Thailand |
| SA 240 Type 2205 Duplex Stainless Steel Plate | Malaysia, South Korea, UK, Bangladesh |
| Duplex Stainless Steel Plate 2205 | Poland, Romania, Singapore, Kuwait |
| SA 240 GR 2205 Coil | Canada, Malaysia, Iran, Singapore |
| 2205 Duplex Steel 28 Gauge Sheet | Singapore, Los Alamos -Mexico, Norway, Finland |
| 10mm thickness ss 2205 duplex steel sheet | Ellington -United States, NY 12203 (USA), Russia, Brazil |
| 10mm thick Duplex 2205 Alloy Plate | Singapore, Dammam -KSA, Hong Kong, UAE |
| 1mm thick steel sheet 2205 duplex | Malaysia, Qatar, Dubai, Nigeria |
| Hot rolled coil 2205 duplex steel 6mm-30mm | Belgium, Czechia, Malaysia, UAE |
| 2B 2205 duplex stainless steel sheet | Thailand, Malaysia, UK, Indonesia |
| 6mm thick 2205 Duplex stainless steel plate | Malaysia, Europe, Philippines, France |
