Incoloy Alloy 825 Pipe Fittings and Buttweld Elbow

astm b366 wpnicmc Butt Weld Pipe Fittings Manufacturer

Incoloy 825 Pipe Fittings are made up of a nickel alloy that is highly corrosion resistant, strong and heat resistant. They belong to the specification ASTM B366. There are different dimensions to the incoloy 825 fittings based on different standards such as ANSI B16.9, B16.28 and so on. The sizes range from ½ inches to 24 inches and there are different schedules ranging from 10 to XXS. Roopam Steel is a manufacturer and supplier of these fittings in different types, sizes and shapes. The Inconel 825 elbow is strong and it is used to change the direction of flow in a pipe line. Usually the angle of turn is either 90 degrees or 45 degrees. But there are special types of elbows as well. The uns n08825 pipe fittings can be forged, seamless, welded or fabricated. They are strong with up to 1000MPa minimum tensile strength and up to 889MPa minimum yield strength. The astm b564 uns n08825 forged fittings are made even stronger because of the forging.

Incoloy Alloy 825 Fittings

Incoloy Alloy 825 Fittings

ASME SB564 uns n08825 Pipe elbow

ASME SB564 uns n08825 Pipe elbow

astm b366 wpnicmc Butt Weld Pipe Fittings

astm b366 wpnicmc Butt Weld Pipe Fittings

Our incoloy 825 fittings are very cost-effective, Ask free sample of Incoloy 825 elbow

The fittings can operate up to 870 degrees Celsius temperature. The asme sb564 uns n08825 elbow is used in chemical processing, sea water processing, acid processing and in boiler and heat exchanger piping. There are other types of fittings such as the alloy 625 tee which connects three pipes together at one point. The tee could be equal or unequal tee depending on the diameters of the pipes they connect. The incoloy 825 reducer is another type of fitting that reduces the diameter of the pipes where necessary. There are different specifications and standards such as the astm b366 wpnicmc and others which provide standards and limitations as to the composition, mechanical properties and physical properties. We supply the incoloy 825 buttweld fittings along with seamless and forged fittings as well. The buttweld fittings are one of the most commonly used type of fittings for welded applications. Please contact us for your pipe fitting needs for any types such as the Alloy 825 pipe end cap, reducers, elbows or any others.


Specification Chart of Incoloy 825 Pipe Fittings

Dimensions ASME B16.28, MSS-SP-43, ASME/ANSI B16.9, BS4504, BS10, BS4504, BS1560,
Thickness SCH10, SCH 80, SCH 100, SCH20, SCH30, STD SCH40, SCH 160, XXS, SCH60, XS, SCH 120, SCH 140, available with NACE MR 01-75
Type DN15-DN1200
Connection Welding
Bending Radius R=2D, 3D, 5D, 6D, 8D, 1D, 10D or Custom
Manufacturing process Press, Forge, Push, Cast, etc.
Specialized manufacturer of Tees, Crosses, Reducers, 90º Elbows, Stub End, Pipe Bend, 45º Elbows, Pipe Cap

Size Range of Incoloy 825 UNS N08825 Pipe Fittings

  • Incoloy 825 UNS N08825 Seamless ButtWeld Fittings : 1/2 - 10 inch
  • Nickel 825 Welded Pipe Fittings : 1/2" - 48"
  • 825 Incoloy Fittings : ½" NB to 24" NB

Buy uns n08825 pipe fittings at factotry Price, astm b564 uns n08825 forged fittings are Corrosion Resistence

Available Stock of Incoloy 825 ASTM B366 Buttweld Pipe Fittings

Incoloy 825 din 2.4858 Fittings Incoloy 825 Pipe Fitting
Incoloy alloy 825 90 Degree Elbow 825 Incoloy End Cap
Incoloy 825 UNS N08825 45 Degree Elbow Alloy 825 Buttweld Fitting
Incoloy 825 ASTM B366 1D Elbow Nickel 825 Short Stub End
Alloy 825 Stub End Incoloy 825 din 2.4858 Pipe Cap
Incoloy alloy 825 3D Elbow Incoloy 825 ASTM B366 End Cap
Alloy 825 5D Elbow Incoloy 825 Reducer
Incoloy 825 din 2.4858 Buttweld Fittings 825 Incoloy Pipe Bend
Incoloy 825 UNS N08825 Pipe Fittings Incoloy 825 ASTM B366 Long Stub End
Alloy 825 Eccentric Reducer 825 Incoloy Long Radius Elbow
Nickel 825 Concentric Reducer Incoloy alloy 825 Short Radius Elbow
Incoloy 825 UNS N08825 Equal Cross Incoloy 825 Pipe Cap
Incoloy 825 din 2.4858 Lateral Tee 825 Incoloy Cross Tee
Nickel 825 Reducing Cross Alloy 825 Equal Cross
Incoloy 825 Equal Tee Incoloy 825 ASTM B366 Stub End
Incoloy alloy 825 Concentric Reducer Incoloy 825 UNS N08825 5D Elbow
Check Availability of asme sb564 uns n08825 elbow, Suppliers and Stockists of alloy 625 tee. Distributing globally incoloy 825 reducer at best price

Different 825 Incoloy Fittings Types

Nickel 825 Reducing Cross
Incoloy 825 ASTM B366 End Cap
Incoloy alloy 825 Short Radius Elbow
Incoloy 825 din 2.4858 Pipe Cap

Price List of Incoloy 825 din 2.4858 Fittings

Price list of Incoloy 825 Fittings Incoloy alloy 825 Fittings Price in INR Incoloy alloy 825 Fittings Price in USD Incoloy alloy 825 Fittings Price in UAE Dirham
ASTM B366 825 Incoloy Alloy 1″ Schedule 40 Stub End 17690.24 $254.6 UAE Dirham 935.16
Best Price & Fast Delivery for astm b366 wpnicmc stub end, Own stockyard of incoloy 825 buttweld fittings, Largest Manufacturer Alloy 825 pipe end cap

Composition Standard of Alloy 825 Fittings

Grade C Mn Si Fe S Cr Cu Ti
825 min. 22.0 19.5 1.5 0.6
max. 0.05 1.0 0.5 0.015 23.5 3.0 1.2

Mechanical Behaviour of Incoloy alloy 825 Buttweld Fittings

Grade Tensile Strength (MPa) min Yield Strength 0.2% Proof (MPa) min Elongation (% in 50mm) min Hardness
Rockwell B (HR B) max Brinell (HB) max
825 Psi - 80,000 , MPa - 550 Psi - 32,000 , MPa -220 30

Material Equivalent of Nickel 825 Seamless Fittings

Grade UNS No Old British Euronorm GOST Japanese JIS
Incoloy 825 N08825 NA 16 NiCr21Mo 2.4858 NFE30C20DUM --703 NCF 825

whatsapp chat