ASTM B444 UNS N06625 Tubing Manufacturer, Check Weight Chart of Alloy 625 U Tube
Inconel 625 Tube / Tubing / U Tube is made up of a corrosion resistant alloy that is also resistant to oxidation. The nickel alloy has excellent aqueous corrosion resistance and high strength. Roopam Steel is a manufacturer and leading supplier of these tubes in different types and scales. The Inconel 625 seamless tube is made up of a material that has nickel, chromium and molybdenum in it. The material is stabilized with niobium so that it becomes even stronger and corrosion resistant. Inconel 625 Tube belongs to different specifications such as the B444, B829 while the welded tubes are of B705 or B775 specifications. The tubes have 880Mpa minimum tensile strength and 460MPa minimum yield strength. The tubes can operate up to 982 degrees Celsius. This makes the tubes applicable in Inconel 625 Exhaust tubing where the temperatures are high and strength is required. There are grades 1 and 2 in this material.
Inconel 625 Tube
ASTM B444 uns n06625 Tubing
Alloy 625 U Tube
Ready stock of Inconel 625 Seamless Tube at reasonable cost, View Nickel 625 Boiler Tubing Price List
The grade 2 is less common while the astm b444 uns n06625 grade 1 is the most used in high temperature applications such as aircraft ducting systems, turbines, engine thrust reverser systems and others. The smaller tubes less than 4mm in diameter are called the capillary tubing. The inconel 625 capillary tube is used to transfer fluids in consistent rate without corroding or wearing off under pressure and heat. Due to the high strength, corrosion resistance and the high operating temperatures, the inconel 625 u tube for boilers are preferred. The U tubes are made in U shape specifically for heat exchangers and boilers where the tubes turn in opposite directions to make a network of tubes. The inconel 625 heat exchanger tubes are expensive but are very effective in long run. We supply the tubes in different standards and specifications such as the asme sb 444 uns n06625. Please feel free to contact us for more information on any Inconel 625 product or pricing including the inconel 625 cds seamless tubing.
Table of Content
- Inconel 625 Tube Spec Chart
- Various Sizes of Alloy 625 Welded Tube
- Available 625 Inconel Tubing Stock list
- Most Common types Inconel 625 ASTM B163 Tubes
- Cost of ASTM B163 UNS N06625 Tubing
- Composition Chart of Inconel 625 DIN 2.4856 High Pressure Tube
- Mechanical Properties Chart of Inconel alloy 625 Electropolish Tube
- Nickel 625 Seamless Tube Equivalent grades
- Density of B444 UNS N06625 Seamless Tube
- Inconel 625 Welded Tube Melting Range
- Thermal Properties of Nickel Alloy 625 Tubing
- Inconel 625 Tube Sizes
- Outside Diameter & Wall Thickness Alloy 625 Tube
- Inconel 625 Tubing Pressure Rating
- Check what exactly we supply in Following countries
Inconel 625 Tube Spec Chart
| Thickness | 0.3mm – 50 mm, SCH 5, SCH10, SCH 40, SCH 80, SCH 80S, SCH 160, SCH XXS, SCH XS |
| Outer Diameter | 6.00 mm OD up to 914.4 mm OD, Sizes up to 24” NB |
| Type | Seamless / ERW / Welded / Fabricated / CDW |
| Form | Round Tubes, Square Tubes, Rectangular Tubes, Coiled Tubes, “U” Shape, Pan Cake Coils, Hydraulic Tubes |
| Length | Single Random, Double Random & Required Length |
| End | Plain End, Beveled End, Treaded. |
Various Sizes of Alloy 625 Welded Tube
- Nickel 625 ERW Tubes : 1/2″ NB – 24″ NB
- 625 Inconel Seamless Pipe : 1/2″ NB – 16″ NB
- Inconel 625 DIN 2.4856 EFW Pipe : 6″ NB – 100″ NB
- Inconel alloy 625 Tubes : 1/8″NB TO 30″NB IN
Check Dimensions of Inconel 625 Exhaust tubing, Ask free sample of ASME SB444 UNS N06625 grade 1 Tube
Available 625 Inconel Tubing Stock list
| Inconel 625 ASTM B163 Electropolished Tubing | Inconel 625 DIN 2.4856 Rectangular Tube |
| Alloy 625 Square Tubing | Inconel alloy 625 Polished Tube |
| Nickel 625 Tubing | Inconel 625 Fabricated Tube |
| Inconel 625 DIN 2.4856 12mm Tube | Nickel 625 Seamless Tubing |
| 625 Inconel High Pressure Tube | ASTM B163 UNS N06625 Thin Wall Tubing |
| Inconel alloy 625 Electropolished Tubes | Nickel 625 Cold Drawn Seamless Tube |
| Inconel 625 Hydraulic Tubing | ASTM B163 UNS N06625 Coiled Tube |
| Inconel 625 ASTM B163 ERW Tube | 625 Inconel Electropolished Tube |
| Inconel 625 DIN 2.4856 Rectangular Tubing | Inconel alloy 625 CDW Tube |
| Nickel 625 Electropolish Tube | Alloy 625 Capillary Tubing |
| 625 Inconel Small Diameter Tubing | Inconel 625 ASTM B163 ERW Tubing |
| Inconel alloy 625 High Pressure Tube | Inconel 625 Tubing |
| ASTM B163 UNS N06625 Tube | Alloy 625 Round Tube |
| Nickel 625 EFW Tube | ASTM B163 UNS N06625 Finned Tube |
Buy Inconel 625 Capillary Tube at reasonable price. Suppliers and Stockists of WNR 2.4856 Heat Exchanger Tubes
Most Common types Inconel 625 ASTM B163 Tubes
Cost of ASTM B163 UNS N06625 Tubing
| Price list of Inconel 625 Tube | ASTM B163 UNS N06625 Tube Price in INR | ASTM B163 UNS N06625 Tube Price in USD | ASTM B163 UNS N06625 Tube Price in UAE Dirham |
|---|---|---|---|
|
Inconel 625 Pipe (1-1/2 X Sch. 40s X 2.000 L) |
INR 31,984 | 346.41 USD | 1651.87 UAE Dirham |
View Inconel 625 Tubing Pressure Rating. Biggest Alloy 625 CDS Seamless Tubing Distributor
Composition Chart of Inconel 625 DIN 2.4856 High Pressure Tube
| Grade | C | Mn | Si | Fe | S | Cr2 | Al-Ti | Ni | |
| 625 | min. | – | – | – | – | – | 20.0 | – | 58.0 |
| max. | 0.10 | 0.50 | 0.50 | 5.0 | 0.015 | 23.0 | 0.40 | – | |
Mechanical Properties Chart of Inconel alloy 625 Electropolish Tube
| Grade | Tensile Strength (MPa) min | Yield Strength 0.2% Proof (MPa) min | Elongation (% in 50mm) min | Hardness | |
| Rockwell B (HR B) max | Brinell (HB) max | ||||
| 625 | Psi – 1,35,000 , MPa -930 | Psi – 75,000 , MPa – 517 | 42.5 | – | – |
Nickel 625 Seamless Tube Equivalent grades
| Grade | UNS No | Old British | Euronorm | GOST | Japanese JIS | ||
| BS | En | No | AFNOR | ||||
| Inconel 625 | N06625 | NA 21 | NiCr22Mo9Nb | 2.4856 | NC22DNB4M | --75---- | NCF 625 |
Density of B444 UNS N06625 Seamless Tube
| Density | 0.305 lb/inch3 |
Inconel 625 Welded Tube Melting Range
| Melting Range | 2350-2460°F |
Thermal Properties of Nickel Alloy 625 Tubing
|
Temp |
Coefficient of Thermal Exp. |
Thermal Conductivity |
Modulus of Elasticity Dynamic |
|
°F |
in/in °F x 10-6 |
Btu. ft/ft2.hr°F |
psi x 106 |
|
70 |
- |
5.7 |
29.8 |
|
400 |
7.3 |
7.2 |
28.4 |
|
600 |
7.4 |
8.2 |
27.5 |
|
800 |
7.6 |
9.1 |
26.6 |
|
1000 |
7.8 |
10.1 |
25.6 |
|
1200 |
8.2 |
11.0 |
24.4 |
|
1400 |
8.5 |
12.0 |
23.1 |
|
1600 |
8.8 |
13.2 |
- |
Inconel 625 Tube Sizes
| Wall Thickness | inconel 625 Tube Sizes ( O.D.) |
|---|---|
| .010 | 1/16" , 1/8" , 3/16" |
| .020 | 1/16" , 1/8" , 3/16" , 1/4" , 5/16" , 3/8" |
| .012 | 1/8" |
| .016 | 1/8" , 3/16" |
| .028 | 1/8" , 3/16" , 1/4" , 5/16" , 3/8" , 1/2" , 3/4" , 1" , 1 1/2" , 2" |
| .035 | 1/8" , 3/16" , 1/4" , 5/16" , 3/8" , 7/16" , 1/2" , 16" , 5/8" , 3/4" , 7/8" , 1" , 1 1/4" , 1 1/2" , 1 5/8" , 2" , 2 1/4" |
| .049 | 3/16" , 1/4" , 5/16" , 3/8" , 1/2" , 16" , 5/8" , 3/4" , 7/8" , 1" , 1 1/8" , 1 1/4" , 1 1/2" , 1 5/8" , 2" , 2 1/4" |
| .065 | 1/4" , 5/16" , 3/8" , 1/2" , 16" , 5/8" , 3/4" , 7/8" , 1" , 1 1/4" , 1 1/2" , 1 5/8" , 1 3/4" , 2" , 2 1/2" , 3" |
| .083 | 1/4" , 3/8" , 1/2" , 5/8" , 3/4" , 7/8" , 1" , 1 1/4" , 1 1/2" , 1 5/8" , 1 7/8" , 2" , 2 1/2" ,3" |
| .095 | 1/2" , 5/8" , 1" , 1 1/4" , 1 1/2" , 2" |
| .109 | 1/2" , 3/4" , 1" , 1 1/4" , 1 1/2" , 2" |
| .120 | 1/2" , 5/8" , 3/4" , 7/8" , 1" , 1 1/4" , 1 1/2" , 2" , 2 1/4" , 2 1/2" , 3" |
| .125 | 3/4" , 1" , 1 1/4" , 1 1/2" , 2" , 3" , 3 1/4" |
| .134 | 1" |
| .250 | 3" |
| .375 | 3 1/2" |
Outside Diameter & Wall Thickness Alloy 625 Tube
| Types of inconel 625 Tube | Out diameter (OD) | Wall thickness | Length |
|---|---|---|---|
| NB Sizes (in stock) | 1/8” ~ 8” | SCH 5 / SCH 10 / SCH 40 / SCH 80 / SCH 160 | Upto 6 Meters |
| inconel 625 Seamless Tube (Custom Sizes) | 5.0mm ~ 203.2mm | As per requirement | Upto 6 Meters |
| inconel 625 Welded Tube (in Stock + Custom Sizes) | 5.0mm ~ 1219.2mm | 1.0 ~ 15.0 mm | Upto 6 Meters |
Inconel 625 Tubing Pressure Rating
| Size mm |
Grade | Maximum internal pressure, ksi |
||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| 100°F | 200°F | 300°F | 400°F | 500°F | 600°F | 700°F | ||||
| 1.59 x 0.36 | N06625 | 19.21 | 19.21 | 19.02 | 18.83 | 18.54 | 18.15 | 17.77 | ||
| 3 x 0.5 | N06625 | 940 | 940 | 930 | 921 | 907 | 888 | 869 | ||
| 6 x1 | N06625 | 940 | 940 | 930 | 921 | 907 | 888 | 869 | ||
| 8x1 | N06625 | 681 | 681 | 675 | 668 | 658 | 644 | 630 | ||
| 8x2 | N06625 | 1476 | 1476 | 1462 | 1447 | 1425 | 1395 | 1366 | ||
| 10x1 | N06625 | 534 | 534 | 529 | 524 | 516 | 505 | 494 | ||
| 12x1 | N06625 | 440 | 440 | 435 | 431 | 424 | 415 | 407 | ||
| 16x1 | N06625 | 324 | 324 | 321 | 318 | 313 | 307 | 300 | ||
Check what exactly we supply in Following countries
| Alloy 625 Grade 2 Exhaust Tubing | Canada, Philippines, Belgium, Dammam -KSA |
| inconel NCF 625 Rectangular Tubing | Malaysia, Europe, Thailand, Qatar |
| ASME SB571 TUBE ROUND 625 SEAMLESS AMS 5581 .4380 x .0350 x 9/12" RL | Japan, Thailand, Malaysia, Czechia |
| inconel 625 Coiled Tubing used for control line,chemical injection tube | Colombia, Bangladesh, Finland, Malaysia |
| Inconel 625 Grade 2 Round Tubing | Taiwan, Kuwait, Brazil, South Africa |
| Inconel 625 UNS N06625 High Pressure Tubing | South Korea, Singapore, Singapore, Bahrain |
| Ni 625 Cold Drawn Tube. 5 Inch Thick | Indonesia, UK, Nigeria, Philippines |
| ASME SB829 TUBE ROUND 625 SEAMLESS AMS 5581 .5000 x .0280 x 9/12 FT R | France, Hong Kong, UAE, Oman |
| 625 Inconel Alloy Oil and gas Tube | Germany, Iran, Singapore, Chile |
| Inconel Alloy 625 Seamless Heat exchanger Tubes | USA, Romania, Ellington -United States, Netherlands |
| ASME SB704 TUBE ROUND 625 SEAMLESS AMS 5581 .6250 x .0280 x 9/12 FT R | Saudi Arabia (KSA), Malaysia, Singapore, Egypt |
| ASTM B163 NCF 625 Coiled Tubing | South Africa, Los Alamos -Mexico, Malaysia, United Kingdom -UK |
| ASTM B444 Inconel 625 Cold Drawn Seamless Tube | Australia, NY 12203 (USA), China, Sweden |
| Inconel UNS N06625 Annealed Tubes | Malaysia, Malaysia, Philippines, UK |
| ASME SB705 TUBE ROUND 625 AMS 5581 .2500 x .0350 | Italy, Poland, Malaysia, Philippines |
| Inconel 625 1 inch Tube | Turkey, Canada, Dubai, Europe |
| ASTM B705 inconel 625 High Pressure Tubing | Europe, Norway, Malaysia, United Arab Emirates (UAE) |
| ASME SB 444 UNS N06625 Seamless Tube | Malaysia, Russia, UAE, Malaysia |
| WERKSTOFF NR. 2.4856 encapsulated coiled tubing | Spain, Mexico, UK, Singapore |
