Inconel 625 Plate and Sheet Stock

ASTM B443 UNS N06625 Sheet Supplier, View Weight Chart of Ni 625 Clad Plate

Inconel 625 Sheet / Plate is a high alloy high temperature resistant metallic sheet or plate that can operate at temperatures up to 1093 degrees Celsius. This superalloy is made up of nickel, chromium and molybdenum and is stabilized by niobium. Roopam Steel is a supplier of these plates and sheets in various sizes and scales. The Inconel 625 plate is resistant to saline and sea water. This is because the Alloy 625 sheet has high nickel content. The high corrosion allows the plates and sheets to be used in marine applications and equipment. TheUNS N06625 Sheets are very strong with 930MPa minimum tensile strength which means they are stronger than most high alloys. With the strength of the astm b443 uns n06625 they are used in sea water processing plants, flare stacks, aircrafts, fabrications, chemical processing plants and others. Leading Inconel 625 Coil supplier in India. There are different specifications to cover different physical properties such as the Inconel 625 Sheet and others.

Inconel 625 Plate

Inconel 625 Plate

ASTM B443 UNS N06625 Sheet

ASTM B443 UNS N06625 Sheet

Inconel 625 Coil

Inconel 625 Coil

Check Dimensions of UNS N06625 Sheets, Ready to Stock of Alloy 625 Hot Rolled Plate

The sheets and plates can be used as cladding material over other corrosive elements as well. The Alloy 625 strips are used as linings in larger structures and are used to produce pipes through welding. The Inconel 625 Coil is used in heat exchangers and boiler components because of their high temperature resistance. There are Inconel alloy 625 shim pieces applied in between two components for better tightening and the Alloy 625 Foil that is used where thin layer of sheets are needed. The plates and sheets could be produced by different procedures and they could be alloy 625 cold rolled steel sheet if they are rolled under room temperatures or inconel 625 hot rolled plate if they are rolled at high temperatures. We supply the sheets and plates in different specifications and types such as the alloy 625 clad plate and other special types. Biggest Nickel alloy 625 plate supplier in Oman, Qatar, South Africa, Indonesia etc. Please forward your inquiries and custom orders to us.

Inconel 625 Plate

Inconel 625 Plate


Specification List of Inconel 625 Sheet / Plate

ASTM Specification ASTM A240 / ASME SA240
Standard MSRR, AMS, BS, ASTM A240 / ASME SA240
Length & Sizes 1000 mm x 2000 mm, 1000 mm x 2000 mm, 1220 mm x 2440 mm, 1250mm x 2500mm, 1500mm x 3000mm to 6000mm, 2000mm x 4000mm to 6000mm, 1500 mm x 3000 mm, 2000 mm x 2000 mm, 2000 mm x 4000 mm, 2m, 2.44m, 3m, 36" X 120" or 48" X 144", 4' x 8', Cut to size available
Thickness 0.1mm to 100 mm Thk
Width 10-2500mm
Hardness Soft, Hard, Half Hard, Quarter Hard, Spring Hard etc.
Temper Annealed
Condition Polished on both sides
Finish Hot rolled plate (HR), Cold rolled sheet (CR), 2B, 2D, BA NO(8), SATIN (Met with Plastic Coated)
Stock in form of Plate, Sheet, Coils, Foils, Rolls, Plain Sheet, Shim Sheet, Strip, Flats, Clad Plate, Rolling Sheet, Flat Sheet, Rolling Plate, Flat Shim, Blank (Circle), hot rolled, cold rolled, annealed, soft annealed, descaled, sheared, tread plate, Checker Plate
Value Added Service Cladding, Heat Treatment, Annealed, Pickling, Polish, Rolling, Cutting, Bending, Forging, Minor Fabrication Etc.
Test Report
  • Raw Materials Certificate
  • EN 10204/3.1B
  • 100% Radiography Test Report
  • High special strength, high melt point
  • Third Party Inspection Report, etc
  • Excellent corrosive resistance, good thermal resistance
  • Customer support after-sales service
  • Strict Control from Raw Material to Finished

To provide a full profiling service we use numerous profiling methods including:

  • Plasma Plate Cutting
  • Laser Plate Cutting
  • Oxy-propane Flame Cutting
Specialized in
  • material under 3/16 " [5.00 mm] in thickness and 24" [600 mm] and over in width
  • material 3/16" [5.00 mm] and over in thickness and over 10" [250 mm] in width
  • cold-rolled material under 3/16" [5.00 mm] in thickness and under 24" [600 mm] in width
  • Free Quote, Inquiry answered within 24 hours
We offer a comprehensive services designed to add value to your project: plasma cutting, waterjet cutting, laser cutting, bending and mechanical processing, edge preparation, welding, sawing and shearing.

Nickel Alloy 625 Plate Sizes

  • Cold rolled Inconel 625 ASTM B443 Plate : 0.5-6.4 mm
  • Hot rolled Nickel Alloy 625 Plate : 3.0–10.0 mm
  • Inconel 625 DIN 2.4856 Sheet : 0.01~200mm

We stock a range of Nickel 625 Strip Tape in different sizes, Ask for free sample of WNR 2.4856 Coil

Ready Stock of Inconel 625 DIN 2.4856 Plate

Inconel 625 Chequered Plate ASME SB443 UNS N06625 Quarto Plate
625 Inconel Sheet Inconel 625 DIN 2.4856 Tisco Plate
Nickel Alloy 625 Chequer Plate Inconel 625 ASTM B443 Tread Plate
Nickel 625 Checker Plate Alloy 625 Strip
Inconel 625 ASTM B443 Plate Brushed Finish Alloy 625 Hot Rolled Sheet
Inconel 625 10mm Shim ASME SB443 UNS N06625 Cold Rolled Sheet
Inconel 625 ASTM B443 1/4 Inch Coil Alloy 625 Perforated Sheet
Alloy 625 Plate Inconel 625 DIN 2.4856 Rolling Plate
ASME SB443 UNS N06625 Hot Rolled Plate Inconel 625 ASTM B443 Foil
Inconel 625 DIN 2.4856 Cold Rolled Plate Nickel 625 Bbq Plate
Inconel 625 ASTM B443 Plate 2b Finish 625 Inconel Coil
Nickel 625 Plate Mill Finish Nickel Alloy 625 Strip Tape
Alloy 625 Custom Cut Plate 625 Nickel Sheet
Inconel 625 DIN 2.4856 Shim Inconel 625 Laser Cut Plate
Inconel 625 ASTM B443 Embossed Sheet Alloy 625 Perforated Sheet
View Available Thickness of Inconel 625 Coil. Most recognized Inconel Alloy 625 Shim Stockholder

Various Types of Alloy 625 Foil

UNS N06625 nickel alloy 2.4856 sheet
Inconel 625 Sheet
Nickel Alloy 625 Plate
UNS N06625 Sheet
Personalized Size Inconel 625 High Temperature Alloy Sheet
625 Alloy Plate
Inconel 625 Plate
2.4856 Inconel 625 Plate
Inconel Alloy 625 Plate 1.5x914.4x1219.2mm
Nickel alloy inconel 625 sheet and plate 1.5mm/2.0mm/5.0mm/8.0mm thk
ASTM B443 UNS N06625 Grade 1 Foil
Alloy 625 Coil
Nickel 625 Sheet
Inconel 625 Strip
Sb 443 UNS N06625 Sheet
ASTM B443 UNS N06625 Plate

Check Price of Nickel 625 Sheet

Price list of Inconel 625 Sheet ASME SB443 UNS N06625 Sheet Price in INR ASME SB443 UNS N06625 Sheet Price in USD ASME SB443 UNS N06625 Sheet Price in UAE Dirham

Inconel Alloy 625 Plate 70mm Thk As Per Sb 168 Uns No6600, 2400mm X 2400mm Long(Hot Rolled)

INR 1,514 19.95 USD 77.20 UAE Dirham

NICKEL ALLOY INCONEL 625 PLATE AMS 5599 9.53MMX50.4 MMX 50.4MM .375X1.98X1.98

INR 1,421 18.94 USD 69.55 UAE Dirham

NICKEL ALLOY INCONEL 625 PLATE AMS 5599 12.7MMX70 MMX 70 MM.50X2.76X2.76

INR 3,330 44.38 USD 162.99 UAE Dirham


INR 2,935 39.11 USD 143.66 UAE Dirham


INR 2,941 39.19 USD 143.95 UAE Dirham
Inconel 625 cold rolled steel sheet manufacturers, Order custom sizes online Alloy 625 Hot Rolled Plate

Chemical Structure of Inconel 625 ASTM B443 Plate

Grade C Mn Si Fe S Cr2 Al-Ti Ni
625 min. 20.0 58.0
max. 0.10 0.50 0.50 5.0 0.015 23.0 0.40

Mechanical Analysis of 625 Inconel Sheet

Grade Tensile Strength (MPa) min Yield Strength 0.2% Proof (MPa) min Elongation (% in 50mm) min Hardness
Rockwell B (HR B) max Brinell (HB) max
625 Psi – 1,35,000 , MPa -930 Psi – 75,000 , MPa – 517 42.5

Material Equivalent of ASME SB443 UNS N06625 Coil

Grade UNS No Old British Euronorm GOST Japanese JIS
Inconel 625 N06625 NA 21 NiCr22Mo9Nb 2.4856 NC22DNB4M --75---- NCF 625

Standard Specification of Inconel 625 Plate

625 Plate, Sheet, and Coil

  • ASTM B 443 Gr 1
  • AMS 5599
  • ASME SB 443 Gr 1
  • AMS 5599
  • AMS 5599 DDQ
  • AMS 5869
  • AMS 5879 LCF
  • ASTM B443
  • ASTM SB 443
  • BS 3075 NA21
  • DIN 17750

Inconel 625 Sheet Sizes

Size (in inches)
Size (in mm)

Weight Chart of ASTM B443 UNS N06625 Plate

Thickness Plate Weight per Unit Area Density
3/16 inches 0.06000 lbs/in²42.184176 kg/m² 0.315 lbs/in³8.72 g/cm³
1/4 inches 0.08 lbs/in²56.245568 kg/m² 0.315 lbs/in³8.72 g/cm³
3/8 inches 0.121 lbs/in²85.0714216 kg/m² 0.315 lbs/in³8.72 g/cm³
1/2 inches 0.161 lbs/in²113.1942056 kg/m² 0.315 lbs/in³8.72 g/cm³
5/8 inches 0.196 lbs/in²137.8016416 kg/m² 0.315 lbs/in³8.72 g/cm³
3/4 inches 0.235 lbs/in²165.221356 kg/m² 0.315 lbs/in³8.72 g/cm³
7/8 inches 0.274 lbs/in²192.6410704 kg/m² 0.315 lbs/in³8.72 g/cm³
1 inches 0.313 lbs/in²220.0607848 kg/m² 0.315 lbs/in³8.72 g/cm³
1 1/4 inches 0.391 lbs/in²274.9002136 kg/m² 0.315 lbs/in³8.72 g/cm³
1 1/2 inches 0.47 lbs/in²330.442712 kg/m² 0.315 lbs/in³8.72 g/cm³
1 3/4 inches 0.549 lbs/in²385.9852104 kg/m² 0.315 lbs/in³8.72 g/cm³
2 inches 0.627 lbs/in²440.8246392 kg/m² 0.315 lbs/in³8.72 g/cm³
2 1/4 inches 0.705 lbs/in²495.664068 kg/m² 0.315 lbs/in³8.72 g/cm³
2 1/2 inches 0.784 lbs/in²551.2065664 kg/m² 0.315 lbs/in³8.72 g/cm³
2 3/4 inches 0.862 lbs/in²606.0459952 kg/m² 0.315 lbs/in³8.72 g/cm³
3 inches 0.941 lbs/in²661.5884936 kg/m² 0.315 lbs/in³8.72 g/cm³

Melting Range of Nickel 625 Sheet

ASTM B443 Alloy 625 Plate melting range
2350 - 2460°F (1280 - 1350°C)

Density & Specific Gravity of Inconel 625 Sheet

UNS N06625 Inconel 625 Plate density
0.303 lb/in3 (8.44 g/cm3
Specific Gravity
8.44 g/cm3

Alloy 625 Plate Dimensions

ASTM B443 UNS N06625 Plate Metric Dimensions

Surface finish Thickness (mm) Width (mm)
2B – Cold rolled, heat treated, pickled, skin passed 0.25–8.0 max. 2032
2D – Cold rolled, heat treated, pickled 0.4–6.35 max. 1524
2E – Cold rolled, heat treated, mechanically descaled 0.4–8.0 max. 2032
2R – Cold rolled, bright annealed 0.25–3.5 max. 1524
2H – Work hardened 0.4–6.35 max. 1524
Polished, brushed 0.5–4.0 max. 1524

Imperial Dimensions of Nickel Alloy 625 Plate

Surface finish Gauge (in) Width (in)
2B – Cold rolled, heat treated, pickled, skin passed 10–24 max. 72*
2D – Cold rolled, heat treated, pickled 12–24 max. 60
BA Mexinox only 18–28 max. 48
Polished (not brushed) 11–24 max. 60
Temper rolled Mexinox only 13–29 max. 48

Alloy 625 Plate Features

  • Stability during welding
  • Corrosion cracking resistance
  • Heat and cold resistance
  • Salt, fresh water and alkaline chemical resistance
  • Chloride stress resistance
  • Scaling and oxidization resistance

Inconel 625 plate uses

  • Chemical Industries
  • Thermal & Nuclear Power Plants
  • Fertilizer Plant
  • Aerospace
  • Food & Dairy Plants
  • Paper Industries
  • Oil & Gas Exploration
  • Desalination Plant
  • Pharmaceutical Plant

We Have 25 years of Experience as a supplier of Below Products Worldwide

 5mm thick cold rolled astm b443 inconel 625 plate United Kingdom -UK, Chile, South Africa, China
 Inconel 625 Din 2.4856 Cold Rolled Sheet UK, United Arab Emirates (UAE), Bahrain, Philippines
 UNS N06625 Inconel 625 Strip Philippines, Netherlands, Philippines, Malaysia
 Inconel 625 Din 2.4856 Polished Plate Europe, Egypt, Oman, Sweden
 inconel 625 sheet, Thick 0.03 - 1.00 mm, Width 3.0 - 330mm Spain, Australia, Germany, Malaysia
 2.4856 Inconel 625 Hot Rolled Plate Europe, Malaysia, USA, Singapore
 Bright Inconel 625 Sheet/Plate Canada, Italy, Saudi Arabia (KSA), Japan
 AMS 5540 Inconel 625 hot rolled plate .0250 x 48.0000 x 48 Malaysia, Turkey, South Africa, Colombia
 Inconel 625 2B/BA Finish decorative sheet Mexico, Malaysia, Thailand, Taiwan
 inconel 625 sheet and plate 1.5mm/2.0mm/5.0mm/8.0mm thk Malaysia, UK, Bangladesh, South Korea
 inconel 625 Sheet, Thick 0.03 - 1.00 mm, Width 3.0 - 330mm Poland, Singapore, Kuwait, Romania
 Inconel 625 Superalloy Mesh Plate Canada, Iran, Singapore, Malaysia
 Nickel alloy 625 Cold Rolling Coil Singapore, Norway, Finland, Los Alamos -Mexico
 ASME SB443 Inconel 625 Chequered Plate Ellington -United States, Russia, Brazil, NY 12203 (USA)
 625 nickel inconel sheet Singapore, Hong Kong, UAE, Dammam -KSA
 Inconel 625 4*8FT Strip plate Malaysia, Dubai, Nigeria, Qatar
 2.4856 Inconel 625 Hot Rolled Plate Belgium, Malaysia, UAE, Czechia
 0.5~4.0mm thickness cold rolled Inconel Plate Thailand, UK, Indonesia, Malaysia
 Inconel 625 Alloy Hot Rolled Plate Malaysia, Philippines, France, Europe

whatsapp chat